Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 23.06.2025 00:26

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

A circuit breaker is similar, but is resettable.

This device then solves the entire problem.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

The New Twist In Regeneron's 23andMe Bankruptcy Buyout - Investor's Business Daily

What does a fuse do?

These devices are installed between the “hot” and “neutral” and protective ground.

One

Global pandemic warning: Aspergillus deadly fungus mirrors HBO’s ‘The Last of Us’ - Times of India

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Did Meghan Markle Use Her College boyfriend For Star Power?

so, what happens?

This one hit behind the barn.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

What are some best sources of great porn?

What is lightning?

This is where this question deviates from being a 'generic' question, and becomes more specific.

At least they know the answer if they wanted it.

Top Red Sox prospect Roman Anthony hits 497-foot grand slam, longer than any HR in MLB this season - Yahoo Sports

The MOV will conduct when the voltage exceeds 50% of line voltage.

This is 'the assistant's answer'

First Sentence:

Even Captain James T. Kirk was trapped in a woman's body. Don't you think he'd support trans people?

nine

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Are there any industries or sectors where ChatGPT is particularly well-suited for implementation?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

These are simplified answers to the original question, and does not change anything I wrote above.

This is where the MOV conducts again, and dissipated the energy.

Telescope Captures First-Ever Ultra-Fine Magnetic Stripes on the Sun’s Surface! - The Daily Galaxy

At one ohm, the resistor has a maximum of 1 watt power.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

The other is “what does a “fuse” do?”

8 best walking exercises that will help us lose 3-4 kgs within a month - Times of India

[image of Common-mode choke]

Because the load is inductive, the current lags the voltage.(by a bit).

It seems Mohan does not understand the difference between a comment and an Answer.

Why do I get bored with porn so quickly? I can watch maybe half a video (5 mins max) and then get bored and do something else. I don't watch porn often, just a teenager. 17.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

For this case there are devices called Metal oxide varistors (MOV).

Its year 2041, and president Hunter Biden has ordered every republican who sweared at him to be arrested and shot. I am on my way to the death row listening to the cheer of the Liberal mob chanting death death death. How can I escape?

but I think this circuit , shows a few more pieces.

He then describes Rainy Season and Lightning.

He then asserts :

Do you think Lady Gaga and Celine Dion have rehearsed separately for their performance at the Olympics opening ceremony?

2024–10–10[John johnson John Johnson ]

There are three different concepts here that are getting confused.

the problem then depends on "how fast does the fuse operate?".

Vice President JD Vance Just Delivered Incredible News to Bitcoin Investors - Yahoo Finance

but this device (an Inductor) … impedes the rapid changes in the current.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

If you could instantly cancel one social norm, what would it be?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Barnstars:

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Pope Leo XIV Dons White Sox Hat During Public General Audience in Vatican - Sports Illustrated

This is the picture of an electronic coil of wire wound around a core of magnetic material.

But… the neutral is now “floating” because of the 1 ohm resistance.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

(Dc diagram shown, AC is similar).

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

One is “what exactly is in a ‘surge protector’ ? ”

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Edit 2024–10.

He then describes the function of a fuse.

A fuse is a non-resetable over current circuit protector.

Now when you have a certain ac resistance, then a current flows in a loop.

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–10–16 [ OO OLAOYE OYEBODE ]

Here is a simplified AC power diagram.

In schematic diagrams this is the symbol for a fuse:

eight

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

It also is a device that limits the change in current flow.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Upvotes:

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

The third is lightning and “how it gets conducted into a home.”

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

[old diagram got deleted by accident]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

But it can get overloaded, and no longer works.

I post the exact comment here.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

a photo is worth a thousand words.

An AC voltage/ current source, and an ac inductive load.

what exactly is a ‘surge’ protector?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

The bolt then partially travels down the line to your home.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

There are two important concepts here.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.